跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
日语

正翻译步骤 1

步骤 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

次の手順では、電源装置の露出面に手を近づけます。 電源装置の表面または露出したはんだ部分に触れないでください。触れてしまうと、ボードに取り付けられた多くの大型コンデンサからの高圧ショックを受けてしまう危険性があります。

スパッジャーの先端を使用して、電源ボタンケーブルコネクタの両側を押し、ソケットからゆっくりと引き出します。

在开源创作共享许可协议下,你的投稿已被许可