跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 9

步骤 9
Use a soft brush (like a toothbrush or detailing brush) to gently scrub away any corrosion and liquid residue on the logic board and other components.
  • Use a soft brush (like a toothbrush or detailing brush) to gently scrub away any corrosion and liquid residue on the logic board and other components.

  • It's possible to break small solder joints with too much force from the brush. Use just enough force to remove the corrosion and residue.

  • Pay special attention to cable ends, battery contacts, connectors, pins, and fuses, as these parts are prone to corrosion and can easily cause the phone to malfunction.

  • Keep the logic board and any other alcohol-covered components over a cloth. There's a chance the alcohol can damage or mark your work surface.

  • If needed, repeat steps 8 and 9 until all corrosion and residue is gone.

使用一把软刷(牙刷或缝隙清洁刷)来轻轻地刷掉主板和其他元件上的腐蚀物和液体残留。

如果使用刷子时用力过猛,可能会将小的焊点刷掉。确保使用恰当的力道正好能够刷掉腐蚀物和其他残留。

清理时注意排线末端、电池连接部、排线插头、插头触脚和熔丝等,这些元件容易残留腐蚀物并且很容易引起手机故障。

在主板和其他被异丙醇浸泡过的元件下垫一块布。异丙醇很可能损伤您的工作台。

如果需要的话,重复第8和第9步直到所有的腐蚀物和残留物被清理干净。

在开源创作共享许可协议下,你的投稿已被许可