跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 6

步骤 6
If your phone was fully submerged for any amount of time, it is likely some of the internal components corroded. Corrosion looks like a white, chalky film covering metallic surfaces, and is especially prevalent on pins and connectors that carry current. Corrosion dissolves metals and will cause malfunctions in your phone.
  • If your phone was fully submerged for any amount of time, it is likely some of the internal components corroded. Corrosion looks like a white, chalky film covering metallic surfaces, and is especially prevalent on pins and connectors that carry current. Corrosion dissolves metals and will cause malfunctions in your phone.

  • Inspect the logic board and any connectors for signs of corrosion, especially in areas where the LCIs are red.

  • Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical.

  • If all LCIs are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone.

  • If any LCIs are red, if there is corrosion or other liquid residue, if the phone fell into dirty/acidic/sticky liquid, or if you just want to be safe, continue for more thorough cleaning.

如果您的手机被长时间浸泡,其某些内部元件有可能会被腐蚀。腐蚀物看起来像一层白色粉末状薄膜覆盖在金属表面上,多见于通电的排线插头或触脚上。腐蚀物会分解金属并使会您的手机发生故障。

检查主板和所有排线插头是否有被腐蚀的迹象,尤其是浸水指示器变红的区域。

检查所有的外部接口(充电口,耳机孔,SIM卡槽等)是否也有被腐蚀的迹象。这些可能需要使用酒精和刷子来处理,如果清理不理想的话可能要被替换。

如果浸水指示器全部为白色,而且没有任何被浸湿或腐蚀的迹象,将手机保持拆解状态放在温暖干燥的地方一到两天,来蒸发其内部残留的水分,然后将其重新组装。

如果有指示器变为红色,或者有腐蚀物或其他液体残留,或者手机曾掉入肮脏/酸性/黏稠的液体中,又或者您仅仅想确保万无一失,请继续接下来的清理步骤。

在开源创作共享许可协议下,你的投稿已被许可