跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 18

步骤 18
Lift the RAM module to an angle of about 30 degrees and slide it out. When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge.
  • Lift the RAM module to an angle of about 30 degrees and slide it out.

  • When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge.

  • To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place.

將內存 RAM 抬起約30度取出。

处理內存RAM模组时,只能接触模组外部边缘。 请注意不要触摸底部边缘的金色触点。

重新安装内存 RAM 时,使用取出时相同的角度滑进,直到平贴表面。然后向下移动,直到卡进固定夹内。

在开源创作共享许可协议下,你的投稿已被许可