注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 8
步骤 8
-
Slide the blade of a halberd spudger into the opening on the edge of the rear button bracket.
-
Continue sliding the spudger blade around the bracket to cut all the adhesive holding the bracket to the rear case.
-
Remove the bracket.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。