跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 7

步骤 7
Gently pull the motherboard away from the lens.
  • Gently pull the motherboard away from the lens.

  • Flip the camera over.

  • Connecting the motherboard to the front case are seven wires.

  • Desolder the seven wires.

  • If you are only removing the motherboard as an intermediate step to get to other components, do not desolder yet, as not all wires need to be removed.

  • Be careful when desoldering the wires. If you do not know how to properly desolder a wire, seek help to prevent damage to the motherboard. Also, make sure the soldering crunches don't fall into the lens case.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可