跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
意大利语

正翻译步骤 4

步骤 4
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.
  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.

  • (combined into one plug in on the 24")

  • Be sure to keep track of the cables, as they do not have proprietary sockets. Mismatched cables can cause screen issues.

Mentre il pannello del display è sollevato, scollegare i quattro cavi dell'inverter.

Durante la reinstallazione, posizionare i quattro connettori dei cavi dell'inverter negli spazi vuoti fra i componenti collegati al pannello posteriore per garantire il corretto allineamento del pannello del display sui bordi del case posteriore.

(in un solo connettore nel modello da 24")

[* black] With the display panel still lifted, disconnect the four inverter cables.
[* icon_reminder] During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.
[* black] (combined into one plug in on the 24")
+[* icon_caution] Be sure to keep track of the cables, as they do not have proprietary sockets. Mismatched cables can cause screen issues.

在开源创作共享许可协议下,你的投稿已被许可