跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的32指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following 12 screws securing the front bezel to the rear case:
  • Remove the following 12 screws securing the front bezel to the rear case:

  • Eight 13 mm T8 Torx.

  • Four 25 mm T8 Torx.

  • On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).

移除以下固定嵌玻璃凹槽的12颗螺丝:

8颗13mm T8星形螺丝

4颗25mm T8星形螺丝

在24" iMac Intel Model A1225上,底部中央的两颗螺丝长度较长(26mm),两边的四颗螺丝(左边两颗,右边两颗)长度中等(18mm),剩余的六颗螺丝(顶部四颗,底部角落两颗)长度较短(14mm)。

在开源创作共享许可协议下,你的投稿已被许可