Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的32指南

英语
西班牙语

正翻译步骤 1

Step 1
Remove the following 12 screws securing the front bezel to the rear case:
  • Remove the following 12 screws securing the front bezel to the rear case:

  • Eight 13 mm T8 Torx.

  • Four 25 mm T8 Torx.

  • On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可