跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
Heat up the back cover once again so you can slide the plastic card towards the top. Always take a peek underneath the back cover to not damage any parts like the NFC antenna. Move the plastic card until you reach the camera bump. Now slowly lift up the back cover and finally remove it.
  • Heat up the back cover once again so you can slide the plastic card towards the top.

  • Always take a peek underneath the back cover to not damage any parts like the NFC antenna.

  • Move the plastic card until you reach the camera bump. Now slowly lift up the back cover and finally remove it.

  • Be sure to remove any residue from the glue and apply new adhesive when reassembling.

再次加热后壳这样你就可以滑动塑料卡到顶部。

请务必在后盖下方窥探,以免损坏NFC天线等任何部件。

移动塑料卡,直到您到碰到摄像头。 现在慢慢抬起后盖,最后将其取下。

一定要清除胶水中的残留物,并在重新组装时涂上新的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可