注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南。
正翻译步骤 2
步骤 2
-
In the following steps you will be cutting through the adhesive around the edge of the rear glass panel.
-
The adhesive on the rear case is laid out as seen in the first image.
-
The prying pattern as seen from the outside of the phone is as follows:
-
Thick portions of adhesive
-
Thin areas of adhesive
-
Avoid prying here, to protect the fingerprint sensor.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。