跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 3

步骤 3
Grab the iOpener once again to heat up the bottom and top part to further soften the glue. Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top. Don't open the display all the way. It is still connected to the motherboard. Also the gold foil behind the display might come off and remain glued to the midframe. You can re-attach it later.
  • Grab the iOpener once again to heat up the bottom and top part to further soften the glue.

  • Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top.

  • Don't open the display all the way. It is still connected to the motherboard. Also the gold foil behind the display might come off and remain glued to the midframe. You can re-attach it later.

  • If your display is still working take care to not rip the front panel off of the display. You also want to leave the top part alone to not risk cutting any flex cables.

再次使用 iOpener 加热底部和顶部来进一步软化胶水。

现在,你可以将底部的三角撬片移动到靠近home 键的位置,最后将显示屏朝顶部打开。

不要一直打开显示器。它仍然连接到主板。此外,显示屏后面的金箔可能会脱落并保持粘在中框上。你可以稍后重新粘上它。

如果显示器仍在工作,请注意不要将前面板从显示屏上撕下来。你还希望单独留下顶部,以免切割任何柔性电缆。

在开源创作共享许可协议下,你的投稿已被许可