跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 1

步骤 1
Remove the two 5.3 mm T6 torx screws from the LCD connector. Firmly grasp the pull tab on top of the connector and pull it straight up out of its port. Make sure that you are pulling the tab and not the connector cable.
  • Remove the two 5.3 mm T6 torx screws from the LCD connector.

  • Firmly grasp the pull tab on top of the connector and pull it straight up out of its port.

  • Make sure that you are pulling the tab and not the connector cable.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可