跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 4

步骤 4
Lay the iMac down on a table before you remove the LCD so that it doesn't fall. Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case.
  • Lay the iMac down on a table before you remove the LCD so that it doesn't fall.

  • Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case.

  • Lift the right side of the display panel a few inches up from the iMac.

  • Do not lift the LCD all the way up; there are still connectors attaching the LCD to the internals.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可