Skip to main content
英语
中文

正翻译步骤 20

Step 20
Push one corner of a plastic card below the plastic battery frame and underneath the remaining adhered edge of the lower center cell. Do not pry along the edge nearest the battery connector, or you risk damaging the keyboard ribbon cable. Slide your card all the way under the battery cell, and leave it to prevent the battery cell from re-adhering.
  • Push one corner of a plastic card below the plastic battery frame and underneath the remaining adhered edge of the lower center cell.

  • Do not pry along the edge nearest the battery connector, or you risk damaging the keyboard ribbon cable.

  • Slide your card all the way under the battery cell, and leave it to prevent the battery cell from re-adhering.

将塑料卡的一个角推到塑料电池框架下方,并在下部中央的其余粘合边缘下方。

不要沿着靠近电池连接器的边缘撬动,否则可能会损坏键盘带状电缆。

将卡完全滑入电池下方,并将其留在电池上,以防止电池重新粘附。

在开源创作共享许可协议下,你的投稿已被许可