Skip to main content
英语
中文

正翻译步骤 16

Step 16
Repeat the procedure from the prior steps to separate the two battery cells on this side: Apply your adhesive remover to the elevated edge of the outer left battery cell, and wait 2-3 minutes for it to penetrate. Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.
  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer left battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

重复以上步骤中的步骤来分离这一侧的两个电池块:

将粘胶去除剂涂在左侧电池单元的高边上,等待2-3分钟。

在电池下方的塑料卡的一个角上工作,然后将卡完全滑入电池下面将其分开。

对相邻的地方做同样的步骤。

将塑料卡放在适当的位置,或将电池翻转过来,以免在下面的步骤中重新粘住电池。

在开源创作共享许可协议下,你的投稿已被许可