Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 3

Step 3
Use the point of a spudger to flip up the locking mechanism on the I/O board connector. Flip the spudger around and use the flat end to slide the I/O cable out of the connector. Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.
  • Use the point of a spudger to flip up the locking mechanism on the I/O board connector.

  • Flip the spudger around and use the flat end to slide the I/O cable out of the connector.

  • Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.

用撬棒的尖头挑起I/O板连接线的卡扣。

把撬棒翻过来,用平头把I/O排线推出连接器。

把卡扣翻到一个合适的角度再把排线推出连接器。这有助于防止对排线或者连接器接头造成意外伤害。

在开源创作共享许可协议下,你的投稿已被许可