Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 1

Step 1
Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
  • Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:

  • One 5.0 mm screw with a 2.0 mm long shoulder

  • One 4.0 mm screw with a wide head

  • One 4.4 mm screw

拆掉下列将右风扇固定在主板上的螺丝。

一颗5.0mm T5 内梅花头螺丝,带2.0mm内柱。

一颗4.0mm T5 内梅花头螺丝,宽螺丝头。

一颗4.4mm T5 内梅花头螺丝。

[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw
[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw

在开源创作共享许可协议下,你的投稿已被许可