跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 4

Step 4
Use your fingers to pull the AirPort/Camera cables up off the fan. The cables are adhered to the fan, so peel them up carefully to avoid damaging them. Carefully de-route the cables from the plastic cable guide.
  • Use your fingers to pull the AirPort/Camera cables up off the fan.

  • The cables are adhered to the fan, so peel them up carefully to avoid damaging them.

  • Carefully de-route the cables from the plastic cable guide.

  • On reassembly, there should be enough adhesive still on these cables to stick them back down to the fan.

用手指将AirPort /相机电缆从风扇上拔下。

电缆粘在风扇上,小心将其剥离,以免损坏风扇。

小心地将电缆从塑料电缆导轨上卸下。

在重新组装时,这些电缆上仍应有足够的粘合剂将其粘到风扇上。

在开源创作共享许可协议下,你的投稿已被许可