跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 3

Step 3
Use the tip of a spudger to push the camera cable connector out of its socket on the logic board. Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.
  • Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.

  • Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.

使用挑线器的尖端将相机电缆连接器从逻辑板上的插槽中推出。

确保将电路板平行推入电路板,首先推动一侧,然后另一侧将连接器“推出”插座。

在开源创作共享许可协议下,你的投稿已被许可