修复你的物品 社区 商店

MacBook Pro 15" Retina 显示屏 2013 晚期 逻辑板组件更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的15本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 9

步骤 9
MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: 步骤 0 中的图像 1，2 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: 步骤 0 中的图像 2，2

  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • You may need to slide the logic board a few millimeters to the left in order to get clearance for the ports along the right edge of the board.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • Disconnecting the MagSafe 2 connector can be difficult. If you are only removing the logic board to temporarily get it out of the way, such as for a battery replacement, you may find it easier to simply remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, and then remove the logic board and MagSafe board together.

从靠近电池的一侧抬起，将主板向MacBook Pro的顶部旋转。

你可能需要将主板向左滑动几毫米，以便沿着电路板右边缘的端口获得间隙。

使用挑线器的扁平端，小心地将MagSafe 2连接器从主板底部的插座中拔出。

分离MagSafe 2链接会比较困难。如果你只是想暂时的将主板的位置挪一下例如换电池,你可以看看这篇指南 remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, 然后将主板和MagSafe一起卸下。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。