Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的33本指南

英语
中文

正翻译步骤 1

Step 1
Use the tip of a spudger to flip up the I/O board data cable lock and rotate it toward the battery side of the computer. Use the flat end of a spudger to slide the I/O board data cable straight out of its socket on the logic board.
  • Use the tip of a spudger to flip up the I/O board data cable lock and rotate it toward the battery side of the computer.

  • Use the flat end of a spudger to slide the I/O board data cable straight out of its socket on the logic board.

  • Do not lift up on the I/O board data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

使用撬棒尖端将I / O板数据电缆锁向上翻,并将其向计算机的电池侧旋转。

使用撬棒的扁平端将I / O板数据电缆从逻辑板上的插槽中滑出。

请勿抬起I / O板数据电缆,因为其插口非常脆弱。 将电缆平行于逻辑板的表面拉动。

在开源创作共享许可协议下,你的投稿已被许可