跳转到主内容

MacBook Pro 15" Retina 显示屏 2012 中期 左侧风扇更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的37本指南

英语
中文

正翻译步骤 3

步骤 3
MacBook Pro 15" Retina Display Mid 2012 Left Fan Replacement: 步骤 0 中的图像 1,3 MacBook Pro 15" Retina Display Mid 2012 Left Fan Replacement: 步骤 0 中的图像 2,3 MacBook Pro 15" Retina Display Mid 2012 Left Fan Replacement: 步骤 0 中的图像 3,3
  • Use the tip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Starting at the top of the cable, slide a plastic opening tool under the left fan cable to free it from the logic board.

  • Use caution when freeing the cable, as it is strongly adhered to the logic board. If necessary, use an iOpener or hair dryer to heat the cable in order to soften the adhesive and make it easier to remove.

  • Lift the left fan out of the device.

  • When reinstalling the fan, it's easier to connect the fan ribbon cable as you drop the fan in place, rather than after you've installed the three fan screws.

使用撬棒尖端来将风扇排线从ZIF插座上解锁下来。

请确保您在撬动铰链部分而不是插座本身。

从线缆顶部开始,在线缆底部滑入一个塑料打开工具来将线缆从逻辑板上卸下。

卸下电缆时要小心谨慎,因为它牢固地固定在逻辑板上。 如有必要,请使用iOpener或吹风机加热电缆,以便软化粘合剂并使其更易于清除。

从设备上取出左风扇。

装回风扇时,较为简单的方法是先连接风扇电缆,而不是先安装三个风扇螺钉。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利