Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 13

Step 13
Slide one corner of a plastic card between the middle two cells, and under the elevated edge of the center-right battery cell. Slide the card farther underneath the battery cell to slice through the adhesive securing it in place. Don't try to fully separate this battery cell yet. Leave your plastic card in place to prevent it from re-adhering.
  • Slide one corner of a plastic card between the middle two cells, and under the elevated edge of the center-right battery cell.

  • Slide the card farther underneath the battery cell to slice through the adhesive securing it in place.

  • Don't try to fully separate this battery cell yet. Leave your plastic card in place to prevent it from re-adhering.

使用塑料卡片的一角来在中间两个电池之间滑动,并在中右部电池单元的升高的边缘处滑动下去。

将卡片滑到电池单元的下方更远的地方 ,通过这样将其固定到位的粘合剂进行切割。

不要试图完全分开这个电池。 将塑料卡留在原处,以防止其重新粘贴。

在开源创作共享许可协议下,你的投稿已被许可