Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 11

Step 11
It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro. Repeat the procedure from the prior steps to separate the two battery cells on this side: Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
  • It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.

  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

现在是切换方向的时候了。 取出您的书或泡沫块,并将其放在MacBook Pro的另一侧。

重复以上步骤中的步骤来分离这一侧的两个电池单元:

将胶粘剂去除剂涂在外层电池的高边上,等待2-3分钟。

在电池下方的塑料卡的一个角上工作,然后将卡完全滑入电池下面将其分开。

对相邻的电池组做同样的事情。

将塑料卡放在适当的位置,或将电池翻转过来,以免在下面的步骤中重新粘住电池。

在开源创作共享许可协议下,你的投稿已被许可