跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

Step 6
Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell. You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
  • Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell.

  • You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.

沿右外电池单元的升高边缘均匀涂抹几滴粘合剂。

你不需要使用太多。小瓶子含有的溶剂量是拆除所有电池所需溶剂量的两倍以上。

等待2-3分钟,让液体粘合剂去除剂渗入电池单元下方,然后再进行下一步。

在开源创作共享许可协议下,你的投稿已被许可