跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows: Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass. Push the fingerprint sensor off of its adhesive from the outside of the glass.
  • If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:

  • Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.

  • Push the fingerprint sensor off of its adhesive from the outside of the glass.

  • If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing.

  • This will make the adhesive less likely to be reusable, so try pushing with your finger first.

重新加热iOpener然后将其放在后玻璃指纹传感器上。

推动指纹传感器,来使其与后面板上的粘合剂分离。

如果传感器很难卸下,请轻轻地将一个塑料打开工具放置在塑料背衬的下方,以便在推动之前松开粘合剂。

这样做可能损坏粘合剂无法重复使用,所以请先尝试第一种方法。

[* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* black] If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing.
[* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* black] If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing.
[* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first.

在开源创作共享许可协议下,你的投稿已被许可