跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 11

步骤 11
It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro. Repeat the procedure from the prior steps to separate the two battery cells on this side: Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
  • It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.

  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

是时候换到另一边了。把书本或者是泡沫块垫到Macbook Pro的另一边

重复之前的步骤把这一侧的两个电池分离

在抬高一侧的电池外缘使用粘胶去除剂,并且等待2-3分钟让其渗透

使用塑料卡片的一角划入电池底部将电池完全分离

对相邻电池采取同样措施

将塑料卡片放在电池底部或者将电池翻转避免再次粘合,以便进行接下来的步骤

在开源创作共享许可协议下,你的投稿已被许可