跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

步骤 6
Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell. You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
  • Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell.

  • You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.

在被抬高一侧的电池的右侧外部均匀地使用少量粘胶去除剂(大约1毫升)

你不需要用很多去除剂。那一小管里的去除剂足够把所有电池取下来两次。

在你进行下一步之前,等待2-3分钟让液态粘胶去除剂渗入到电池下面去

在开源创作共享许可协议下,你的投稿已被许可