跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Flip the console over to continue working on the top side. Place fingers underneath edge of power supply unit on both sides and pull straight up. Be careful not to pull too far, the assembly is still connected at one point.
  • Flip the console over to continue working on the top side.

  • Place fingers underneath edge of power supply unit on both sides and pull straight up.

  • Be careful not to pull too far, the assembly is still connected at one point.

  • Grip the connector behind the power supply and pull straight out.

将主机翻过来,在正面继续。

拉起供电模组,放在主机上。

小心别拉得太远,该组件仍然在一点上有连接。

抓住供电模组后的连接器直接拔出来。

[* black] Flip the console over to continue working on the top side.
[* black] Place fingers underneath edge of power supply unit on both sides and pull straight up.
[* icon_note] Be careful not to pull too far, the assembly is still connected at one point.
[* blackred] Grip the connector behind the power supply and pull straight out.
[* blackred] Grip the connector behind the power supply and pull straight out.

在开源创作共享许可协议下,你的投稿已被许可