跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 2

步骤 2
In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis. For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.
  • In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

  • For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel.

  • Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

接下来,我们要通过对粘合处的反复划动将显示屏从背板上分离出来。

作为参照,左图是拆开后的手机背板。注意显示单元左右侧与 OLED 面板之间的狭窄缝隙。

如果工具深入侧面 1.5 毫米以里,或是顶部和底部 9 毫米以里,将永久性地损坏显示屏。

在开源创作共享许可协议下,你的投稿已被许可