跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 3

步骤 3
Grab the iOpener once again to heat up the bottom and top part to further soften the glue. Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top. Don't open the display all the way. It is still connected to the motherboard.
  • Grab the iOpener once again to heat up the bottom and top part to further soften the glue.

  • Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top.

  • Don't open the display all the way. It is still connected to the motherboard.

  • The home button may stick to the display assembly or remain on the midframe. Keep an eye on it if your new display does not come with one already attached.

再次拿出 iOpener 加热底部和顶部,进一步软化胶水。

现在您可以将底部的撬片移向主页按钮,并最终将显示屏向顶部打开。

不要全打开显示器。 它仍要连接到主板。

主页按钮可能粘在显示屏组件上或留在中框上。 如果你的新显示器没有附带,请留意。

在开源创作共享许可协议下,你的投稿已被许可