翻译步骤＃10 - iRobot Roomba 880 Bumper Sensors Replacement - iFixit

英语

中文

上一步下一步

正翻译步骤 10

步骤 10

Rotate the device 180 degrees so you are looking at the other side.

Remove the cables that are holding this part of the motherboard in place.

This might require a bit of tugging. We recommend gently wiggling the cable at the base, to help loosen the hold.

Rotate the device 180 degrees so you are looking at the other side.
Remove the cables that are holding this part of the motherboard in place.
This might require a bit of tugging. We recommend gently wiggling the cable at the base, to help loosen the hold.

在开源创作共享许可协议下，你的投稿已被许可。