跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 4

步骤 4
Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate. Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate. Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.
  • Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

  • Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

  • Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

使用一个 T8 安全梅花螺丝从金属板上移除11个 10mm 银色螺丝。

使用一个 #0 十字螺丝从金属板上移除11个 4mm 黑色螺丝。

拔下通过金属板连接到主板小部分的三根电缆。

电缆接口可能会很锋利。

[* red] Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.
[* orange] Use a Phillips #0#1 screwdriver to remove the eleven 4mm black screws from the metal plate.
[* yellow] Pull offUse a spudger to disconnect the three antenna cables connected to the small portion of the motherboard showing through the metal plate.
[* icon_caution] The cable connectors can be sharp
(two black and one white) by prying them straight up from their sockets.
[* orange] Use a Phillips #0#1 screwdriver to remove the eleven 4mm black screws from the metal plate.
[* yellow] Pull offUse a spudger to disconnect the three antenna cables connected to the small portion of the motherboard showing through the metal plate.
[* icon_caution] The cable connectors can be sharp
(two black and one white) by prying them straight up from their sockets.

在开源创作共享许可协议下,你的投稿已被许可