跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 3

步骤 3
Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone. Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

在操作的时候尽量保持胶条平直不要弄皱了,起皱的胶条容易黏在一起并且容易拉断在向外拉的时候。

向机身底部方向慢慢的拉出电池胶。

拉出电池和后盖间电池胶时要稳当且保持电池胶的形态。最好的方法是,成60°角左右。

电池胶将被拉长为原来的数倍。继续拉伸胶条,有必要的话可以抓住靠近电池端继续操作。

在开源创作共享许可协议下,你的投稿已被许可