跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 4

步骤 4
Heat an iOpener and apply it to the right edge of the phone for two minutes. Insert an opening pick near the top edge of the phone, where you have already sliced the adhesive. Slowly guide the pick around the right corner.
  • Heat an iOpener and apply it to the right edge of the phone for two minutes.

  • Insert an opening pick near the top edge of the phone, where you have already sliced the adhesive.

  • Slowly guide the pick around the right corner.

  • Carefully slide the pick down the right edge of the phone to slice through the adhesive.

  • Do not insert the pick more than 1 mm (1/32") along the edge, or you will damage the display assembly.

  • Repeat the step for the left edge of the phone.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可