跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 10

步骤 10
While the battery is still connected, lift the bottom end of the battery up. Use tweezers to pull all of the adhesive liners off. Carefully lower the battery back into place and press against the edges to activate the adhesive.
  • While the battery is still connected, lift the bottom end of the battery up.

  • Use tweezers to pull all of the adhesive liners off.

  • Carefully lower the battery back into place and press against the edges to activate the adhesive.

  • Use a spudger to pry up and disconnect the battery connector from the motherboard and bend it away slightly.

  • Continue with the reassembly process.

电池仍然连接时,抬起电池的底端。

用镊子将所有粘合剂背衬拉下来。

小心地将电池放回原位并按压边缘以粘合。

使用撬棒撬起并断开电池接口与主板的连接并稍微弯曲。

继续重组过程。

在开源创作共享许可协议下,你的投稿已被许可