跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 9

步骤 9
To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery. To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned. Tear two adhesive strips from the adhesive card, and apply them to the frame. Do not remove the top liner yet.
  • To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery.

  • To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned.

  • Tear two adhesive strips from the adhesive card, and apply them to the frame. Do not remove the top liner yet.

  • Place the new battery in the recess.

  • Use the flat end of a spudger or your finger to temporarily connect the battery connector to the motherboard.

为降低火灾和化学品泄漏的风险,请勿重复使用并重新安装废旧电池。

要安装电池,请使用新的胶条并确保电池接口正确对齐。

从胶条卡上撕下两条胶带,然后将它们粘在框架上。不要移除顶部衬里。

将新电池放入凹槽中。

使用撬棒或手指的扁平端将电池接口临时连接到主板。

在开源创作共享许可协议下,你的投稿已被许可