跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
荷兰语

正翻译步骤 9

步骤 9
To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery. To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned. Apply stretch release adhesive strips,  double-sided tape, or pre-cut adhesive strips.
  • To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery.

  • To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned.

  • Apply stretch release adhesive strips, double-sided tape, or pre-cut adhesive strips.

  • Place the new battery in the recess.

  • Use the flat end of a spudger or your finger to temporarily connect the battery connector to the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可