跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

步骤 6
Flip the phone over. Push an opening pick slowly and firmly down the right edge of the battery (which should be warm). Slide it slightly back and forth to slice through the adhesive. Be careful not to snag the white antenna cable running along the edge of the battery while you are push down on the pick.
  • Flip the phone over.

  • Push an opening pick slowly and firmly down the right edge of the battery (which should be warm). Slide it slightly back and forth to slice through the adhesive.

  • Be careful not to snag the white antenna cable running along the edge of the battery while you are push down on the pick.

  • If you are having a hard time getting the opening pick under the battery, heat and re-apply an iOpener as instructed in the previous step.

  • You can also apply some high concentration isopropyl alcohol to the edge in order to help weaken the adhesive.

  • Once you have loosened the right side of the battery from the case, leave an opening pick in place to prevent the adhesive from re-adhering.

翻过手机。

将三角撬片缓慢而稳固地向下推到电池的右边缘(应该是温暖的)。轻轻地前后滑动以切穿粘合剂。

当你按下三角撬片时,小心不要抓住沿着电池边缘运行的白色天线电缆。

如果你很难在电池下方打开三角撬片,请按照上一步骤中的说明加热并重新应用iOpener。

你也可以在边缘涂抹一些高浓度的异丙醇,以帮助减弱粘合剂。

从外壳上松开电池的右侧后,留下一个三角撬片,以防止粘合剂重新粘附。

在开源创作共享许可协议下,你的投稿已被许可