跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
中文

正翻译步骤 2

步骤 2
The snap seals don't need a lot of pressure to open, and may break if forced. Be gentle with the opening tool. Wedge the sharp edge of the plastic opening tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up. There will be a snapping sound as you remove the back panel, but that is just the seal loosening.
  • The snap seals don't need a lot of pressure to open, and may break if forced. Be gentle with the opening tool.

  • Wedge the sharp edge of the plastic opening tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up.

  • There will be a snapping sound as you remove the back panel, but that is just the seal loosening.

  • Continue breaking the seals by sliding the plastic opening tool around the entire laptop under the seam until the back panel is free.

  • Once you have broken all the seals, carefully lift the panel off.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可