跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

iPad 5 Wi-Fi 版Home 键组件更换

指南的前提条件

只有所有的必备指南都已被翻译,此翻译才会被认为是完整的。

加热iOpener

iPad Air Wi-Fi 前面板的更换

iPad Air Wi-Fi LCD屏幕的更换

iPad Air WIFI版 前面板替换

指南信息

= 完成 = 未完成
    Follow the steps in this guide to replace the home button assembly in an iPad 5 Wi-Fi. [ … ] Note that the Touch ID sensor in the home button is paired to its respective logic board, so replacing the home button will result in loss of Touch ID functionality. [ … ] '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''
    Follow the steps in this guide to replace the home button assembly in an iPad 5 Wi-Fi. [ … ] Note that the Touch ID sensor in the home button is paired to its respective logic board, so replacing the home button will result in loss of Touch ID functionality. [ … ] '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''

      描述一下你正在修理的device的特别配件或组件。例如:电池

      创建一个标题。

      这个简短的一两句总结将会出现在搜索结果中。

      在读者深入阅读这份指南之前做好背景信息交流。

      说明(指南)步骤

      第 1 步

      轻轻地从前面板背面剥下Home 键连接线缆。

      第 2 步

      在金属屏蔽罩和前面板之间插入拨片,然后从数字转换器中轻轻地撬出线缆。

      第 3 步

      轻轻地从Home 键托架上剥下金属触点。

      第 4 步

      使用塑料撬棒从前面板背面撬开Home 键托架。

      第 5 步

      按下数模转换器外侧的Home 键,将粘合剂固定到位。

      第 6 步

      取出Home 键组件。

      在开源创作共享许可协议下,你的投稿已被许可