跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 14

步骤 14
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Pry up only on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

  • There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.

使用撬棒平端将前置摄像头连接器从电路板上断开。

只在连接器上撬,不在插座本身上。

将前置摄像头电缆翻起。

金色电缆触点之间有一点导电胶。 在重新组装期间,务必施加压力以再次黏接这些触点。

在开源创作共享许可协议下,你的投稿已被许可