跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 1

步骤 1
Ensure your device is completely OFF before starting this guide.
  • Ensure your device is completely OFF before starting this guide.

  • Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.

  • Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.

  • When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

使用T4螺丝刀,拧开固定背板一圈的9颗5mm T4螺丝

使用T4螺丝刀,拧开中间的1颗8mm T4螺丝

组装还原时,请注意不要把螺丝上的太近,否则可能损坏塑料背板

[* icon_caution] Ensure your device is completely OFF before starting this guide.
[*
red] Use a Torx T4 screwdriver to unscrew the 9 5mmnine 5 mm screws holding the cover in place.
[* orange] Use a Torx T4 screwdriver to unscrew the 8mm8 mm screw in the center.
[* icon_caution] Ensure your device is completely OFF before starting this guide.
[*
red] Use a Torx T4 screwdriver to unscrew the 9 5mmnine 5 mm screws holding the cover in place.
[* orange] Use a Torx T4 screwdriver to unscrew the 8mm8 mm screw in the center.
[* icon_reminder] When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

在开源创作共享许可协议下,你的投稿已被许可