跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 6

步骤 6
Use the flat end of a spudger to gently lift the battery connector end of the logic board up. Make sure you're not pulling against any cables. If you feel resistance, check all cables, connectors, and components are clear of the board.
  • Use the flat end of a spudger to gently lift the battery connector end of the logic board up.

  • Make sure you're not pulling against any cables. If you feel resistance, check all cables, connectors, and components are clear of the board.

使用一个撬棒平端轻轻抬起逻辑板电池连接器。

确保所有电缆都已断开。如果你觉得没有,请检查所有的电缆,连接器和组件是否真的断开。

在开源创作共享许可协议下,你的投稿已被许可