跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 19

步骤 19
Remove the lightning connector assembly. Before installing or replacing the Lightning connector assembly: Use a plastic tool to scour any bits of adhesive residue from the rear case.
  • Remove the lightning connector assembly.

  • Before installing or replacing the Lightning connector assembly:

  • Use a plastic tool to scour any bits of adhesive residue from the rear case.

  • Make sure the Lightning connector assembly is correctly positioned so that the two white dots on the iPhone's rear case show through the two circular cutouts in the Lightning flex cable. If they don't, the flex cable will remain misaligned and you won't be able to reconnect it to its socket on the logic board.

移除 Lightning 接口总成。

重新安装 Lightning 接口总成前请注意:

使用撬棒将任何残留在后壳上的粘胶清理干净。

确保将 Lightning 接口排线上的两个圆孔对准后壳上的两个小白点。如果没对准的话,排线会错位,插头将无法重新对准连接到主板的插座上

在开源创作共享许可协议下,你的投稿已被许可