跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 1

步骤 1
Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
  • Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Use a P5 Pentalobe driver to remove the six screws securing the lower case:

  • Two 6.2 mm screws

  • Two 5.3 mm screws

  • Two 3.4 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

在拆你的MacBook Pro之前,把电池的电放到25%以下。一个充满电的锂电池如果被意外穿刺,它会着火或是爆炸。

在你进行下一步之前,先关了电源拔了插销。

用P5五角改锥来拆掉固定底壳的这六颗螺丝:

两颗6.2mm螺丝

两颗5.3mm螺丝

两颗3.4mm螺丝

在整个维修过程中,请跟踪每个螺丝并确保它准确地回到原来的位置,以免损坏你的设备。

在开源创作共享许可协议下,你的投稿已被许可