跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
To test the lens calibration reassemble the console up to the ground springs near the memory card slots.
Testing and further adjustments
  • To test the lens calibration reassemble the console up to the ground springs near the memory card slots.

  • The memory card ground springs MUST be put back on prior to restarting your console.

  • If any further adjustments are necessary just turn the potensiometer no more than 1 or 2 degrees more per readjustment. Eventually you'll start to see less DRE messages.

  • Once there no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.

  • As stated in the title of this guide. This procedure may not fix your DRE problems if the faut lies elsewhere in the system. But this will cover about 98% of DRE messages.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可