跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 6

步骤 6
Starting where the last pass left off, insert the metal spudger another two inches underneath the battery. As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery. Repeat this process for the remaining adhesive strips.
  • Starting where the last pass left off, insert the metal spudger another two inches underneath the battery.

  • As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery.

  • Repeat this process for the remaining adhesive strips.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可