跳转到主内容
英语
中文

正翻译步骤 9

步骤 9
Using a Phillips #0 screwdriver, remove the two screws (Length: 7.7 mm) that hold the speaker in place. Follow the wire until you find the ribbon cable that holds the wires and pull straight out of the connect to remove it. You are now free to replace the speakers.
  • Using a Phillips #0 screwdriver, remove the two screws (Length: 7.7 mm) that hold the speaker in place.

  • Follow the wire until you find the ribbon cable that holds the wires and pull straight out of the connect to remove it.

  • You are now free to replace the speakers.

  • There are two speakers so be sure to repeat the same steps for the second speaker.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可